RP & Mfg. Equipment
ABOUT US
PRODUCTS
SUPPORT
TOPICS
SOLUTIONS
Fortus 900mc
Follow Us
3D Production System: Fortus 900mc
REAL PARTS. REAL POSSIBILITES
FORTUS 900mc 3D Production System Overview
Part tolerances distinguish the Fortus 900mc from other 3D systems. Designed and manufactured for the highest accuracy and repeatability, the 900mc speeds up conceptual modeling and functional prototyping while allowing for multiple iterations. The Fortus 900mc 3D Production System also has our highest throughput and envelope volume, making it appropriate for fabrication and assembly tools, as well as end-use parts.
System Highlights
• Largest build envelope and highest throughput
• Precision ball-screw technology for increased accuracy, repeatability and reliability
• Model materials available to make parts for high-heat applications
System Features
Model Material
System Highlights
• Largest build envelope and highest throughput
• Precision ball-screw technology for increased accuracy, repeatability and reliability
• Model materials available to make parts for high-heat applications
System Features
Model Material
Accuracy:
Parts are produced within an accuracy of +/- .0035 inch or +/- .0015 inch per inch, whichever is greater (+/- .089 mm or +/- .0015 mm per mm, whichever is greater).*
Network Connectivity:
10/100 base T connection. Ethernet protocol.
Power Requirements:
•230VAC nominal 3-phase service with 5% regulation.
•230VAC as measured phase-to-phase; 50 Hz or 60Hz; 40 Amp circuit.
Regulatory Compliance:
CE
Special Facility Requirements:
None
Parts are produced within an accuracy of +/- .0035 inch or +/- .0015 inch per inch, whichever is greater (+/- .089 mm or +/- .0015 mm per mm, whichever is greater).*
Network Connectivity:
10/100 base T connection. Ethernet protocol.
Power Requirements:
•230VAC nominal 3-phase service with 5% regulation.
•230VAC as measured phase-to-phase; 50 Hz or 60Hz; 40 Amp circuit.
Regulatory Compliance:
CE
Special Facility Requirements:
None
* Note: Accuracy is geometry dependent. Achievable accuracy specification derived from statistical data at 95% dimensional yield.
Support Material:
•Soluble Support - ABS-M30, ABS-M30i, PC-ABS, PC
•Breakaway Support - PC, PC-ISO, ULTEM 9085, PPSF / PPSU
Material Bays:
•2 build material bays
•2 support material bays
Build Size:
914 x 610 x 914 mm (36 x 24 x 36 in.)
Layer Thickness:
•0.330 mm (0.013 in.)
•0.254 mm (0.010 in.)
•0.178 mm (0.007 in.)
•Soluble Support - ABS-M30, ABS-M30i, PC-ABS, PC
•Breakaway Support - PC, PC-ISO, ULTEM 9085, PPSF / PPSU
Material Bays:
•2 build material bays
•2 support material bays
Build Size:
914 x 610 x 914 mm (36 x 24 x 36 in.)
Layer Thickness:
•0.330 mm (0.013 in.)
•0.254 mm (0.010 in.)
•0.178 mm (0.007 in.)