RP & Mfg. Equipment
3D Production System: Fortus 250mc
REAL PARTS. REAL POSSIBILITES
FORTUS 250mc 3D Production System Overview
The Fortus 250mc is our most affordable 3D production system, and it delivers flexibility and reliability. It's the only Fortus 3D Production System that uses ABSplus, which is up to 40 percent stronger than our standard ABS material.
• Three layer resolutions
• Nine material colors plus custom color options
• Most affordable Fortus system
•2 auto-load cartridge bays of 56.3 cu. in. each
•1 build material bay
•1 support material bay
254 x 254 x 305 mm (10 x 10 x 12 in.)
Multiple build speed options for fine feature detail and smoother surface finish.
•0.330 mm (0.013 in.)
•0.254 mm (0.010 in.)
•0.178 mm (0.007 in.)
Parts are produced within an accuracy of ± .0095 inch (± .241 mm)*
*Note: Accuracy is geometry dependent. Achievable accuracy specification derived from statistical data at 95% dimensional yield.
10/100 base T connection. Ethernet protocol.
110-120 VAC, 60Hz, minimum 15A dedicated circuit; or 220-240 VAC 50/60 Hz, minimum 7A dedicated circuit.
CE / ETL
Special Facility Requirements:
•Maximum room temperature of 86° F (30° C)
•Relative humidity range: 30-70%, non-condensing